A few days back I revealed my latest design, Project: Children's Playroom, that had the little storage ottomans shown above. What you may not know, is that when I purchased those little babies they were not made with storage at all. When I first saw them, I knew they were the perfect size and shape for the playroom, but they needed to be overhauled just a bit. They had a pretty solid body, but when I flipped them over I noticed they were hollow on the inside. I thought...hmmm, what a waste. So Instantly my mind ran with the idea to not only reupholster them, but to knock off the legs, turn them over, make new tops and wala...new storage ottomans. So...that's just what I did!
Tools you will possibly need to do something like this yourself.
I began by knocking off the little peg legs and removing the existing fabric. The fabric was attached by nailheads all around the bottom of the ottomans (such a waste of nailheads, but I knew I could use them for another project). After removing a gajillion nailheads, the fabric (for the most part) easily pulled off leaving what you see below - a super thin layer of batting and a fabric covered top.
So what is batting? Thanks for asking...Basically batting is a thin layer of cotton, polyester, or wool that goes between layers of fabric. It can come in different thicknesses and is usually sold by the yard. Most fabric stores or shops that specialize in upholstery products carry batting you can purchase.
Next, I cut off the aztec fabric to expose the perfectly shaped foam you see below glued to the top. I used a butter knife - a great household tool =)) - to score around the edges to loosen up the foam topper for removal.
I then used the foam topper to trace out the exact size the new wooden tops needed to be. I knew that the little kiddies and their friends would be pouncing on these tops so I selected two small squares of a pretty sturdy wood (ohhh....I can't remember) to cut from. After tracing the shape onto the wood, I used my handy jigsaw to cut the wood into rounds. I then glued the foam toppers onto the new wooden tops and wrapped batting around them (sorry, I forgot to take a pic).
After adding the batting to the tops and sides of the ottomans, I stapled a canvas dropcloth to the tops to create a super smooth surface for my fabric. You would be amazed with what you can do with regular old painting dropcloths from the hardware store.
Notice also that the batting here is much thicker than what was originally on the ottoman. I selected a thicker batting because little kiddies would be running around and I wanted it to be a little more plush and soft just in case one of them bumped their little noggins against it while playing ultimate warrior or something. =)) You'd be surprised!!
Lastly, I wrapped the toppers and the sides with my fabric. I stapled the heck out of it to make sure that all fabric was secure enough to stand up to the wear and tear of little kids and then glued the little peg legs back onto the bottom with gorilla glue. That glue holds up like a champ!
So there you have it folks!! This is something that you can easily do yourself! It doesn't have to be perfect, just perfect enough for you!! If you have any questions or comments please feel free to drop me a line in the comments section below!! Until next time, happy decorating!!
Making Home, Home